<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>涂层应用</title>
    <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/</link>
    <description>Latest 50 infos of 涂层应用</description>
    <copyright>Copyright(C) Empire CMS</copyright>
    <generator>Empire CMS by Empire Studio.</generator>
    <lastBuildDate>Sun, 12 Apr 2026 06:33:04 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.sunspraying.com/e/data/images/rss.gif</url>
      <title>桑尧热喷涂网</title>
      <link>http://www.sunspraying.com/</link>
    </image>
    <item>
      <title><![CDATA[超音速火焰喷涂的应用领域]]></title>
      <description><![CDATA[ 1.在航空领域的应用超音速火焰喷涂碳化钨已经在航空领域得到了大量的应用，其占比例达到35%，超音速火焰喷涂技术的使用已经基本实现了标准化。空客、波音等大型飞机的高强钢、钛合金部件都采用超音速火焰喷涂技术制备耐 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20220105/2525.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20220105/2525.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 05 Jan 2022 00:59:31 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高温高压快速制备高导热PcBN陶瓷]]></title>
      <description><![CDATA[ 为了研究高温高压下添加不同Al-Si比例结合剂的PcBN复合材料的物相组成，通过ＸＲＤ对试样进行了测试，结果如图１所示。图１　添加不同Al-Si比例结合剂的PcBN样品的XRD图Al具有较低的熔点，在高温高压的状态下处于熔融状态，熔融的Al渗 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20211228/2519.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20211228/2519.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 28 Dec 2021 07:47:21 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[微加工制造技术]]></title>
      <description><![CDATA[ 工作在100GHz以上频率的器件，其结构变得很小，普通的精密机械加工很难应用，需要采用微加工技术；而微加工又不能用于低于100GHz的器件，因为其相关尺寸又太大。因此，微加工的引入并不威胁到替代传统器件的普通加工，它将创立新一 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20211228/2518.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20211228/2518.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 28 Dec 2021 07:44:55 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[多环境自适应智能润滑材料涂层]]></title>
      <description><![CDATA[  近年来，空间/临近空间飞行器是国内外研究的热点。这些装备的运动部件，需要在多种极端恶劣环境以及变工况条件下服役。运动部件不仅要经受多种严酷环境和极端变工况（大交变接触应力、瞬时过载等）的考验，而且对精度、寿命、 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2165.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2165.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 17 Apr 2020 06:43:24 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[核辐照腐蚀与防护涂层]]></title>
      <description><![CDATA[  对于核电技术的发展，我国研究方向主要集中在核电设备所用的燃料包壳、发电装置等。但是就核反应堆而言，其高温、高压和强辐照所造成的腐蚀对于材料的选用提出更苛刻的要求。锆合金包壳的燃料体系已经在轻水反应堆（Light ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2164.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2164.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 17 Apr 2020 06:42:50 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[极寒、高原腐蚀与防护涂层]]></title>
      <description><![CDATA[  极寒、高原地区的防腐有机涂层包括传统的环氧涂层、醇酸涂层以及聚氨酯涂层等。丙烯酸树脂面漆也具有较好的耐候性，与环氧漆和醇酸漆相比，其光泽保持度较好，适合在较低温度下使用。极寒、高原环境虽低温干燥，但臭氧浓度 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2163.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2163.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 17 Apr 2020 06:42:16 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[深海环境腐蚀与防护涂层]]></title>
      <description><![CDATA[  在深海领域海水的溶解氧含量、盐度、温度及生物条件等都与浅海有一定差异，材料在深海领域中的腐蚀行为与浅海有所不同。就海水中的溶氧量而言，随着海洋深度的增加，海洋中的溶解氧逐渐降低，但由于有洋流的补充，深海领域中 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2162.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2162.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 17 Apr 2020 06:41:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[海洋大气环境腐蚀与防护涂层]]></title>
      <description><![CDATA[  海洋大气腐蚀主要由潮湿大气环境下的薄液膜所导致，腐蚀多发生在高温高湿的沿海地区。尤其是当高温高湿的海洋大气中含有酸性污染物或者盐分颗粒时，腐蚀问题将进一步加重。高温高湿的大气环境会造成金属基材的腐蚀，例如 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2161.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200417/2161.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 17 Apr 2020 06:40:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[耐高温涂料在钛合金基材上的应用]]></title>
      <description><![CDATA[  钛合金材料在船舶中的应用可提高装备和船舶整体的性能和使用寿命，同时有利于降低船体重量。目前船舶的热力管道（如柴油机排烟管、蒸汽管等部位）已逐渐采用钛合金取代传统钢基材，然而在海洋环境下，钛合金与其相接触的异种 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200310/2124.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20200310/2124.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 10 Mar 2020 06:18:11 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超音速火焰喷涂在拉拔丝设备中的应用]]></title>
      <description><![CDATA[  拔丝塔轮、 收线盘、 拔丝缸及导向槽等是拔丝设备的关键零部件， 磨损是其失效的主要原因。 以拔丝塔轮为例， 它以一定的张紧力将丝材缠绕在轮表面的凹槽内， 由于轮表面与丝材之间的磨损， 降低其使用寿命，利用 HVO/AF 超音 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190805/1985.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190805/1985.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 05 Aug 2019 10:20:00 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[生物涂层]]></title>
      <description><![CDATA[  近几年，人们采用热喷涂技 术 在 金 属 材 料（主 要 是 钛 合金）表面涂覆羟基磷灰石（Ｈｙｄｒｏｘｙａｐａｔｉｔｅ，ＨＡ）等生物活性陶瓷，获得了高质量的人工骨骼材料。这类材料不仅具有人体运动所需要的强韧性，而且涂层优良的生物相容性和生物稳定性能诱导和 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190701/1958.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190701/1958.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 01 Jul 2019 13:48:42 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[氧化铝的应用]]></title>
      <description><![CDATA[  随着科学技术的发展及制造技术的提高 ,氧化铝陶瓷在现代工业和现代科学技术领域中得到越来越广泛的应用 。1)机械方面。有耐磨氧化铝陶瓷衬砖、衬板 、衬片,氧化铝陶瓷钉,陶瓷密封件(氧化铝陶瓷球阀), 黑色氧化铝陶 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190606/1941.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190606/1941.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 06 Jun 2019 07:10:13 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[钽涂层及其磨损与烧烛性能]]></title>
      <description><![CDATA[  航空航天、军事工业中很多的关键部件在高温条件下工作，受到热、机械以及化学三种过程的交互作用，烧蚀磨损严重。因此，在高温下具有良好磨损烧蚀性能的材料是尖端工业领域的迫切需求。磨损与烧蚀是热力学、机械以及化学 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190505/1917.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190505/1917.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Sun, 05 May 2019 11:05:55 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[航空涡轮发动机叶片的表面失效及涂层防护技术]]></title>
      <description><![CDATA[  航空和涡涡轮轮发的动工机作叶叶片片主和要导指向压叶气片机。随发动机型号、叶片种类和工作位置不同,叶片的工作条件和对使用性能的要求也有所不同。总的说来,它们都承受比较大的工作应力和比较高的工作温度,而且应 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190316/1899.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190316/1899.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Sat, 16 Mar 2019 08:59:18 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[WC-Co涂层]]></title>
      <description><![CDATA[  W C-C o是典型硬质合金材料，由于W C-C o涂层有很高的硬度和良好的强韧性，常用超音速火焰喷涂和爆炸喷涂制备超硬（1200～1400HV0.2）耐磨涂层。这两种喷涂方法由于焰流速度高、温度较低，可以有效地减轻W C在喷涂过程中的分解 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190308/1893.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190308/1893.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 08 Mar 2019 07:07:05 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Ｑ２３５钢表面镀铝层的制备及其形貌特征的研究]]></title>
      <description><![CDATA[  在生产建设和日常生活中，钢 铁 材 料 有 着 广 泛 的 应 用，但是由于耐腐蚀性差，其 应 用 受 到 了 一 定 的 限 制。铝的导电、导热、装饰性能好，并且具有良好的抗腐蚀性和力学性能。如果在钢铁表面获得一层镀铝层，既可 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190121/1883.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190121/1883.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 21 Jan 2019 10:41:55 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[晶粒长大抑制剂对WC-Co类涂层的影响]]></title>
      <description><![CDATA[     WC-Co类涂层具有较高的硬度和优良的耐磨性,在航空航天、汽车、船舶、石油化工、机械制造、电力、印刷等领域得到广泛应用。研究发现,超细/纳米粉末具有特殊的小尺寸效应和表面效应等,因此超细/纳米结构涂层具有更 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190117/1881.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190117/1881.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 17 Jan 2019 11:38:14 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高温固体自润滑涂层]]></title>
      <description><![CDATA[       箔片空气轴承是采用弹性箔片作为支承元件并以周围空气作为润滑剂的一种动压轴承，工作时就不受温度和速度的限制，已成为目前先进无油透平技术的技术关键。然而，在起动和停车阶段由于轴的转速低，轴和箔片间磨损严重。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190114/1879.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190114/1879.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 14 Jan 2019 11:31:12 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[石墨基体等离子喷涂ＴｉＣ涂层耐烧蚀性能研究]]></title>
      <description><![CDATA[  石墨、Ｃ／Ｃ 复合材料具有高比强度、低烧蚀率、高熔点以及良好的抗热震性能，在航空航天、冶金等工业有着广泛的应用前景．然而，当温度升高到３７０℃以上时，石墨、Ｃ／Ｃ 复合材料在大气环境下会迅速氧化，尤其是在高温高速燃流的特殊环境下， ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190107/1875.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20190107/1875.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 07 Jan 2019 12:27:05 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[石墨烯自润滑减磨涂层添加剂]]></title>
      <description><![CDATA[       热喷涂制备 WC-Co 涂层具有较高的显微硬度、较耐磨性、氧化物含量低， 涂层结合强度高等优势，是常用的耐磨涂层， 但在实际工作环境中， 由于 WCCo 涂层较高的硬度， 摩擦体系的摩擦因数较大， 摩擦会产生较严重的磨损， 甚 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20181217/1866.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20181217/1866.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 17 Dec 2018 11:41:14 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[45 圆钢表面真空熔覆 WC 增强镍基合金层]]></title>
      <description><![CDATA[    45 钢作为常用的结构零件， 无论在力学性能还是价格方面，都具有一定的优势， 已成为众多工业产品的重要选材，而零部件的破坏大多首先发生在零件表面。对 45 钢进行表面强化， 保证良好力学性能的前提下提高其表面质量，对延 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20181213/1864.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20181213/1864.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 13 Dec 2018 11:11:43 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高压水射流处理技术]]></title>
      <description><![CDATA[         高压水射流处理技术是指一定流量的水在大于２００ＭＰａ的高压作用下冲刷在工件表面上，使工件表层产生塑性变形，得到理想的组织结构和残余压应力的分布，从而达到粗化的效果。高压水速度可达到６００ｍ／ｓ以上，特别适合于较硬的陶瓷、硬金 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180622/1793.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180622/1793.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 22 Jun 2018 12:41:29 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[喷砂处理工艺]]></title>
      <description><![CDATA[        喷砂处理是指一定粒径的氧化铝、氧化硅等硬质砂粒在压缩空气的作用下由喷嘴高速喷射到工件表面，通过砂粒的撞击和冲刷作用来粗化工件表面。喷砂处理过的表面显微状态受砂粒特性（包括砂粒的形状、硬度、质量、成 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180622/1792.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180622/1792.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 22 Jun 2018 12:38:25 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热喷涂高性能陶瓷涂层的典型应用]]></title>
      <description><![CDATA[         采用高速燃气火焰喷涂、爆炸喷涂或等离子喷涂技术，在高温炉辊表面喷涂特种陶瓷或金属陶瓷涂层，具有优异的耐高温、抗氧化、抗粘着、防结瘤和自清理净化性能，既可显著提高炉辊使用寿命，又能生产表面光洁质量优良的 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180620/1790.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180620/1790.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 20 Jun 2018 12:24:40 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[陶瓷热喷涂]]></title>
      <description><![CDATA[          陶瓷是金属元素和非金属元素组成的晶体或非晶体化合物。它和金属材料、高分子聚合物材料一起，构成固态工程材料的三大支柱。现代已将金属陶瓷、其他无机非金属材料统归入陶瓷范畴，成为品种、功能极多的一个材 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180620/1788.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180620/1788.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 20 Jun 2018 12:16:22 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[C /C 复合材料的高温抗氧化防护研究进展]]></title>
      <description><![CDATA[   ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180527/1783.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180527/1783.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[]]></author>
      <pubDate>Sun, 27 May 2018 13:53:02 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[常用激光熔覆材料体系]]></title>
      <description><![CDATA[  尽管激光熔覆技术研究日趋成熟,但是目前尚无专门用于激光熔覆的合金粉末,国内外常用的激光熔覆材料主要是热喷涂或热喷焊类粉末材料&amp;quot;常用于激光熔覆的粉末主要分为自熔性合金粉末和复合粉末&amp;quot;(l)自熔性合金粉末自熔性 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180114/1729.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180114/1729.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[天天]]></author>
      <pubDate>Sun, 14 Jan 2018 13:41:54 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热喷涂铝]]></title>
      <description><![CDATA[  热喷涂铝是把铝丝用氧气一乙炔火焰加热到熔融或半熔化状态，以微粒方式高速冲击并贴附在经过预处理的金属表面上 ,形成涂层的一种防腐技术。由于喷成的涂层有许多微孔,会影响使用性能,故一般将耐蚀性涂料加以稀释,进行 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180105/1723.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180105/1723.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[天天]]></author>
      <pubDate>Fri, 05 Jan 2018 15:10:21 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[镁合金热喷涂的发展趋势]]></title>
      <description><![CDATA[          随着新材料的出现以及热喷涂设备和喷涂工艺的不断改进，制备镁合金涂层性能将会进一步提高． 关于镁合金基热喷涂涂层的研究， 今后应在如下几个方面展开深入细致的工作.1) 发展新型涂层研究解决涂层与镁合金基体 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180104/1722.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180104/1722.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[天天]]></author>
      <pubDate>Thu, 04 Jan 2018 14:45:54 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[飞机蒙皮的静电喷涂]]></title>
      <description><![CDATA[           飞机在高空飞行时， 承受着恶劣的环境， 比如:高温、低温、酸雨等， 因此飞机蒙皮涂料的性能要求极高; 飞机蒙皮涂料直接与外界相接触， 受力复杂，不仅要求强度高， 塑性较好， 而且要求表面光滑， 同时具有 一 定 的 耐  ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180102/1720.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20180102/1720.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[阮润琦]]></author>
      <pubDate>Tue, 02 Jan 2018 15:02:37 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[表面工程技术在航空发动机制造中的应用与发展]]></title>
      <description><![CDATA[ 航空发动机作为飞机制造的重点，加工技术不断升级。本文主要介绍表面工程技术在航空发动机制造中的应用，并介绍该技术在未来发展中的应用重点。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170721/1528.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170721/1528.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[何金梅，蔡卿，张麓娟]]></author>
      <pubDate>Fri, 21 Jul 2017 08:33:48 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[燃气轮机热障涂层高温腐蚀研究综述]]></title>
      <description><![CDATA[ ［目的］为了梳理燃气轮机热障涂层服役过程中的高温腐蚀问题，［方法］对燃气轮机热障涂层腐蚀类型和提高抗腐蚀性能的方法分别进行了归纳分析，并展望了提高热障涂层抗腐蚀性能的发展方向。［结果］经归纳分析，燃气轮机热障涂层腐蚀类型主要包括：陶瓷层高温相变、粘结层氧化、盐雾腐蚀、CMAS腐蚀以及燃料杂质腐蚀。提高热障涂层抗腐蚀性能的方 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170718/1523.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170718/1523.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[刘永葆，刘建华，余又红，贺星，刘莉]]></author>
      <pubDate>Tue, 18 Jul 2017 08:57:30 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[激光重熔热喷涂涂层研究进展]]></title>
      <description><![CDATA[ 热喷涂涂层存在孔隙度高、组织不均匀、涂层与基体的结合强度差等问题；激光重熔热喷涂涂层可以减少涂层孔隙率，改善涂层微观组织，封闭涂层贯通孔隙，改善涂层与基体的结合强度，提高涂层硬度耐磨性和耐蚀性。但激光重熔会使涂层产生裂纹、成片剥落和出现孔洞；在热喷涂粉末中加入稀土元素和低熔点材料，合理控制激光工艺参数，制备梯度涂层 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170717/1521.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170717/1521.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[何科杉，程西云，黄钰]]></author>
      <pubDate>Mon, 17 Jul 2017 07:38:38 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[建筑管道的表面喷涂与耐蚀性能研究]]></title>
      <description><![CDATA[ 以Al粉、Zn粉和Al2O3粉为原料，对在建筑用Q235管道表面进行冷喷涂处理，对比分析了3种冷喷涂涂层的宏观形貌、涂层厚度、涂层硬度和电化学性能。结果表明，在相同的冷喷涂工艺下，3种涂层的厚度从高至低依次为：Al&amp;gt;Al-50Al2O3&amp;gt;Al-50Zn。Al涂层、Al-50Zn涂层和Al-50Al2O3涂层都可以对建筑管道提供阴极保护，但是相比较而言，冷喷涂Al-50Zn涂 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170707/1507.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170707/1507.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[姜世坤，张居奎，解艳东]]></author>
      <pubDate>Fri, 07 Jul 2017 08:46:47 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Q235钢表面电弧喷涂铝涂层的断裂机理研究]]></title>
      <description><![CDATA[ 对涂层结构断裂机理的研究是保证高厚度热喷涂涂层安全和稳定的关键。在Q235钢表面高速电弧喷涂不同厚度的铝涂层。对涂层试样进行三点弯曲试验，考察了涂层在受拉、受压及同时受拉力和压力情况下的力学性能，通过扫描电镜观察试样的断裂行为，并通过梁弯曲理论单面、双面涂层2种方法计算了涂层的弹性模量。结果表明:当涂层厚度小于 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170706/1505.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20170706/1505.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[张林，所新坤，陈秀勇，李华，程旭东]]></author>
      <pubDate>Thu, 06 Jul 2017 15:25:53 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Cr_2O_3陶瓷涂层摩擦磨损性能研究]]></title>
      <description><![CDATA[ 摘要 ：Cr2O3陶瓷涂层在摩擦过程中产生的热应力比较小，涂层不容易发生严重断裂，具有孔隙率低、摩擦系数低、导热系数高、耐腐蚀性、高硬度等特性，适用于高温、腐蚀和磨损等特殊工作环境，涂层在摩擦学领域具有广阔的应用前景。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20131214/1441.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20131214/1441.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[张书品]]></author>
      <pubDate>Sat, 14 Dec 2013 00:32:53 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[船舶防污涂料及其减阻效应评价研究]]></title>
      <description><![CDATA[ 海生物的附着不但会加速船舶的腐蚀,更会增加航行阻力和燃料的消耗。传统的释放型涂料毒性高,对环境的影响大;低表面能防污涂料由于其表面能低、环境友好、表面光滑和减阻性能好等特点,受到关注。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20131101/1377.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20131101/1377.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[周鸿飞]]></author>
      <pubDate>Fri, 01 Nov 2013 00:18:02 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[反应喷涂制备Al2O3-TiB2复相涂层的工艺研究]]></title>
      <description><![CDATA[ 在铝合金表面制备复相陶瓷涂层是提高铝合金耐磨性的一种方法。等离子喷涂制备 Al2O3-TiB2复相涂层的方法是将混合粉末机械合金化后，利用等离子喷涂在基体表面原位合成复相涂层。它的显著优点是陶瓷相颗粒较小，分布均匀，强化效果好。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20131016/1356.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20131016/1356.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[李明]]></author>
      <pubDate>Wed, 16 Oct 2013 06:58:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[纳米TiO_2涂层及其复合涂层的制备与光阴极保护性能研究]]></title>
      <description><![CDATA[ 金属腐蚀给人类带来巨大的经济损失，传统的金属防腐蚀方法均存在一定的缺陷。因此开发环境友好型的金属防腐蚀技术具有重要的科学意义与工业应用前景。将纳米TiO2涂层光阴极保护技术应用于金属防腐蚀已引起人们的广泛关注。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130919/1336.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130919/1336.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[周民杰]]></author>
      <pubDate>Thu, 19 Sep 2013 12:51:17 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[TC4 表面微弧氧化复合陶瓷涂层及其热致失效行为研究]]></title>
      <description><![CDATA[ 为了解决 TC4 合金在高温服役环境下所存在的氧化和氧脆的问题，本文采用微弧氧化表面改性技术在 TC4 表面沉积热保护复合陶瓷涂层，在 Al-P 和 Al-P-Zr 两种电解质体系中进行微弧氧化，优选出 MAO 复合陶瓷涂层的最佳工艺参数。利用 XRD、SEM，EPMA，Raman 等分析手段对涂层的相组成、表面形貌、元素分布和微观组织进行表征，研究了涂层 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130822/1301.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130822/1301.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[钟业盛]]></author>
      <pubDate>Thu, 22 Aug 2013 08:19:07 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[工程机械零部件的再制造性评定和 HVOF技术的应用]]></title>
      <description><![CDATA[ 废旧工程机械产品的再制造是循环经济的重要组成部分。再制造工程中，首先要对服役后的废旧零件进行再制造性评估、寿命预测，然后运用包括超音速火焰喷涂在内的先进表面工程技术进行修复以提升废旧零部件的使用性能。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130813/1276.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130813/1276.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[付腾]]></author>
      <pubDate>Tue, 13 Aug 2013 01:03:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超音速火焰喷涂纳米Ni60-TiB2复合涂层及其耐磨耐蚀性能研究]]></title>
      <description><![CDATA[ 摘 要：作为Cr3C2和WC的一种潜在替代者，TiB2陶瓷不仅具有优异的力学性能，同时还具有良好抗高温氧化和耐腐蚀性能，使其成为制备金属基陶瓷复合涂层中的最佳增强候选材料。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130730/1245.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130730/1245.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[吴姚莎]]></author>
      <pubDate>Tue, 30 Jul 2013 02:30:53 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[水热氢还原制粉技术及其在热喷涂领域的应用]]></title>
      <description><![CDATA[ 摘   要：本文概述了水热氢还原制备金属粉末和复合粉末的方法，包括其基本原理、影响因素和技术特点，并介绍了该技术在热喷涂领域的应用。  ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130713/1224.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130713/1224.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[尹春雷，冀国娟]]></author>
      <pubDate>Sat, 13 Jul 2013 04:10:11 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热喷涂技术在摩擦磨损领域应用研究]]></title>
      <description><![CDATA[ 摘 要:该文综述了热喷涂技术在摩擦磨损领域应用的研究现状及进展,主要论述了喷涂方法、喷涂工艺、喷涂材料、涂层结构、涂层处理及喷涂涂层的磨损机理等方面在摩擦磨损领域的研究与进展,通过上述几方面的讨论与分析,总结了热喷涂涂层在摩擦磨损领域具体的应用情况,分析和总结了热喷涂涂层在摩擦磨损领域应用失效的主要原因和 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130605/1161.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130605/1161.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[王 强,刘 莹]]></author>
      <pubDate>Wed, 05 Jun 2013 02:00:33 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[等离子喷涂耐磨涂层技术在大型薄壁零件上的应用研究]]></title>
      <description><![CDATA[ 陶瓷涂布刮刀是造纸工业中的关键零部件，也是易损耗件，需求量大，技术含量高。目前我国全部依赖进口，价格昂贵。本文针对陶瓷涂布刮刀制备技术中的两大难题:即大型薄壁零件上的耐磨陶瓷涂层制备工艺和刮刀涂层精密磨削工艺开展研究，初步取得的主要研究成果如下: ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130410/1088.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130410/1088.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[王灿明]]></author>
      <pubDate>Wed, 10 Apr 2013 03:43:18 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热喷涂防腐技术在近海水工钢闸门中的应用]]></title>
      <description><![CDATA[ 摘 要：结合独流减河进洪闸除险加固工程实践，介绍了水工钢闸门的热喷锌＋涂料封闭防腐技术，对闸门防腐的施工过程主要环节及注意事项进行了总结。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130330/1074.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130330/1074.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[刘智超,康 丽,刘兰芳]]></author>
      <pubDate>Sat, 30 Mar 2013 12:26:21 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电热爆炸喷涂相涂层的制备及性能研究]]></title>
      <description><![CDATA[      利用电热爆炸喷涂的方法，在铝合金和钢基体上分别制备了钥涂层。用扫描电子显微镜(SEM)、划痕仪、显微硬度计、表面粗糙度仪、微磨损试验机等表征了钥涂层性能。借助正交试验方法分析了铝涂层制备中各工艺参数对涂层质量的影响，确定了最佳工艺参数，并研究完成了一种制备大直径圆筒试样涂层的新方法。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130312/1048.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130312/1048.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[刘加健]]></author>
      <pubDate>Tue, 12 Mar 2013 05:22:27 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[陶瓷层密封阀应用技术研究]]></title>
      <description><![CDATA[ 球锥面密封结构是航空航天及化学工业中普遍采用的密封结构，对其密封性能研究及改进具有一定的工程应用价值。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130304/1032.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130304/1032.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[孙新新]]></author>
      <pubDate>Mon, 04 Mar 2013 00:23:52 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[HVOF喷涂WC一1OCo一4Cr涂层的磨蚀特性]]></title>
      <description><![CDATA[ 在WC基陶瓷涂层材料中，用10%Co一4%Cr作复合豁结相的材料具有更加优良的耐磨损和抗腐蚀性能。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130224/1012.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130224/1012.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[王华仁 韩变华编译]]></author>
      <pubDate>Sun, 24 Feb 2013 02:20:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Y2O3-ZrO2热障涂层高温氧化、腐蚀及抗热震性能研究]]></title>
      <description><![CDATA[ 本文采用大气等离子喷涂技术在高温合金基体上制备了氧化钇稳定化的氧化锆（YSZ）热障涂层，表面陶瓷层分别为 YSZ 微米涂层、YSZ 纳米涂层，中间黏结层为 NiCoCrAlY 合金。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130216/997.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/tucengyingyong/20130216/997.html</guid>
      <category>涂层应用</category>
      <author><![CDATA[张佐伊]]></author>
      <pubDate>Fri, 15 Feb 2013 23:39:33 +0000</pubDate>
    </item>
  </channel>
</rss>