<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>喷涂设备</title>
    <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/</link>
    <description>Latest 50 infos of 喷涂设备</description>
    <copyright>Copyright(C) Empire CMS</copyright>
    <generator>Empire CMS by Empire Studio.</generator>
    <lastBuildDate>Sat, 11 Apr 2026 23:57:52 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.sunspraying.com/e/data/images/rss.gif</url>
      <title>桑尧热喷涂网</title>
      <link>http://www.sunspraying.com/</link>
    </image>
    <item>
      <title><![CDATA[ZrO2基自润滑复合陶瓷材料制备技术]]></title>
      <description><![CDATA[  目前，制备ZrO2基自润滑复合陶瓷材料通常采用粉末冶金技术。由于ZrO2和加入的固体润滑剂热膨胀系数不同，烧结过程中的升温速率和降温速率尤为重要，特别是升温速率不合适会使最终的烧结体表面产生鼓泡的现象，或者尚未冷却 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/2156.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/2156.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 10 Apr 2020 13:27:39 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[等离子喷涂氧化铝粉末]]></title>
      <description><![CDATA[  Al2O3 粉末作为典型的热喷涂陶瓷涂层材料，熔点和硬度都较高，分别达到 2038 ℃和 60 ～ 70 HRC，是优良的抗磨损和耐腐蚀的材料，其制备的涂层在磨损、腐蚀、高温等工况中具有较好的使用性能。因为熔点高的特点，通常利用等离子 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1973.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1973.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 19 Jul 2019 01:53:06 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[新型喷***的设计要求]]></title>
      <description><![CDATA[  1.为了便于推广应用,要求在原有普通电弧喷涂设备基础上进行新型高速电弧喷枪的技术开发研究;2.喷涂粒子速度要明显提高,同时要适当控制因加速而产生的粒子飞溅,保证高的沉积效率;3.喷涂层的组织结构要有明显的改善, ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1969.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1969.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Sat, 13 Jul 2019 03:11:58 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超音速等离子喷涂]]></title>
      <description><![CDATA[          美国从20世纪80年代中期率先投入研究，到80年代后期，国际上对超音速等离子喷涂技术的研究仍处于起步阶段。美国Browning公司在1986年推出了试验研究型超音速等离子喷涂系统（PlazJet），90年代中期美国TAFA公司将Brow ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1782.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1782.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 24 May 2018 09:00:12 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[激光重熔热喷涂涂层显微组织和性能]]></title>
      <description><![CDATA[          激光重熔热喷涂涂层可以有效降低涂层的孔隙率，改善涂层微观组织，封闭涂层贯通孔隙，提高涂层的显微硬度，促使涂层与基体的结合界面由机械结合转为冶金结合，从而提高涂层的耐磨损、耐腐蚀性能。A. 改善涂层微观组织 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1752.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1752.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[天天]]></author>
      <pubDate>Mon, 26 Mar 2018 12:21:34 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Jet Kote型超音速热喷***]]></title>
      <description><![CDATA[            Jet Kote型超音速热喷与传统的热喷涂法等离子法,纯手工喷涂法和爆炸喷涂法相比,Jet Kote法的特点是火焰工作温度不是很高(2200~3300C),粉粒运动速度极高(2-4马赫数。因此涂层质量(结合强度、致密度、氧化 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1730.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1730.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[天天]]></author>
      <pubDate>Mon, 15 Jan 2018 09:06:58 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超低压等离子喷涂设备]]></title>
      <description><![CDATA[     超低压等离子喷涂设备与低压等离子喷涂设备组成基本相同，主要区别在于真空系统及喷枪。真空系统采用大功率罗茨泵，以获得超低压状态；喷枪一般采用大功率等离子喷枪，提高等离子焰流能量。    典型的超低压等离子喷涂设 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1685.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1685.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Fri, 10 Nov 2017 14:43:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[多电极等离子喷枪]]></title>
      <description><![CDATA[     降低等离子电流密度的方法之一就是使用多阴极/多阳极设计，将电流分散到多个电极上。    AxialIII等离子喷***是在1990年由UniversityofBritishColumbia发明，由NorthwestMettech公司商业化成功。它采用的是三阴极、三 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1676.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1676.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Mon, 30 Oct 2017 13:25:21 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[氧化锌陶瓷靶材的制备]]></title>
      <description><![CDATA[ ZnO（Zinc Oxide）是 II-VI 族具有纤锌矿结构的直接带隙半导体材料，晶体类型为六角柱结构。ZnO 禁带宽度为 3.34eV，在氢等离子体中具有很高的稳定性，而且 Zn 储量丰富、无毒，具有适宜的光电特性，是极具竞争力的透明导电膜材料。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1482.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1482.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[刘丽杰]]></author>
      <pubDate>Wed, 12 Mar 2014 02:15:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Al-Sn-Cu 汽车轴瓦耐磨涂层的制备与研究]]></title>
      <description><![CDATA[ 为满足轴瓦工作性能要求，轴瓦材料逐渐由单层合金向多层复合发展，其中轴瓦涂层对轴瓦性能的大幅提高起着重要的作用。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1443.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1443.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[于佃荣]]></author>
      <pubDate>Tue, 17 Dec 2013 22:56:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[新型防污减阻软涂层的研究]]></title>
      <description><![CDATA[ 本文将柔软光滑的水凝胶和强亲水大分子刷防污技术有机结合,以水为介质,使两性电解质单体(亲水)和功能单体(疏水)形成微嵌段共聚物,两亲性电解质起防污作用,功能单体则用于交联及粘接物体表面,实现与基板的强粘接。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1413.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1413.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[王 平]]></author>
      <pubDate>Wed, 27 Nov 2013 23:38:22 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电弧喷涂金属涂层耐海水冲蚀性能研究]]></title>
      <description><![CDATA[ 为了加速海洋资源的开发，人类在海洋中建造了无数固定与活动的海上构筑物。暴露于海洋环境中的钢构造物，腐蚀最严重的区域是浪花飞溅区，其主要的失效形式之一是冲刷腐蚀。为了得到性能优异的防腐涂层，研究防腐涂层的冲刷腐蚀性能对新型涂层制备有重大意义。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1404.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1404.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[魏金鑫]]></author>
      <pubDate>Sun, 17 Nov 2013 23:47:42 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[等离子堆焊 SiCp增强铁基复合涂层的组织及性能]]></title>
      <description><![CDATA[ 表面涂层技术对于提高金属零件的表面性能、延长服役寿命具有重要作用，特别是通过外加陶瓷颗粒于金属基中形成表层复合材料可以很大幅度地提高耐磨性，这是目前耐磨涂层的研究热点，在各类增强颗粒/金属基(SiCp/Ti、SiCp/Al、WCp/Ni、WCp/Co 等)复合体系涂层研究上也获得了进展。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1366.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1366.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[宋 自 力]]></author>
      <pubDate>Fri, 25 Oct 2013 00:58:23 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[悬浮液等离子喷涂制备生物陶瓷涂层]]></title>
      <description><![CDATA[ 在钛合金（Ti6Al4V）基体表面涂覆具有生物活性的生物陶瓷涂层，综合利用钛合金的机械性能和生物陶瓷的生物活性，是当今最具应用前景的骨植入体研究热点之一。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1352.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1352.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[李智佳]]></author>
      <pubDate>Mon, 14 Oct 2013 04:17:27 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[非晶涂层的制备、结构与性能研究]]></title>
      <description><![CDATA[ 非晶合金由于其高强度/高硬度、高弹性极限、以及优异的防腐耐磨性能而成为一种有潜在应用前景的新型金属材料。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1329.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1329.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[张 诚]]></author>
      <pubDate>Tue, 10 Sep 2013 06:56:09 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超细 WC 粉末的制备及其烧结体的性能研究]]></title>
      <description><![CDATA[ WC 平均晶粒度小于 0.5 µｍ的硬质合金称为超细硬质合金。与传统的硬质合金相比，超细硬质合金具有高韧性、高耐磨性和高温强度，被广泛应用于切削工具、耐腐蚀工具、钻头、刀具、金属加工工具及耐磨部件等。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1299.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1299.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[罗金华]]></author>
      <pubDate>Thu, 22 Aug 2013 01:45:41 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[机械合金化法制备 MCrAlY涂层的研究]]></title>
      <description><![CDATA[ 在机械合金化过程中，金属粉末在经历冷焊和细化的同时，其中一部分粉末会吸附在磨球表面及球磨罐的罐壁上，经过反复挤压和冷焊，形成一定厚度的涂层。根据这一原理，本文选取两种粉末体系 NiCrAl·Y2O3和 NiCrAlCo·Y2O3作为原始粉末，配以一定的球磨工艺参数，在管状碳钢材料内壁制备 MCrAlY 涂层，并有选择地对制得的合金层进行激光重熔。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1293.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1293.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[唐忠婷]]></author>
      <pubDate>Tue, 20 Aug 2013 06:50:03 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[HVAF 与 HVOF 铁基非晶涂层的结构与性能研究]]></title>
      <description><![CDATA[ 本文通过实验优化设计确定了 HVAF 和 HVOF 制备铁基非晶涂层的最佳工艺。利用 X 射线衍射分析仪（XRD）、扫描电子显微镜（SEM）、氧含量测试仪、热机械分析仪（TMA）、显微硬度计、力学试验机、电化学工作站、摩擦磨损试验机等实验手段对比研究了 HVAF 和 HVOF 铁基非晶涂层的结构、电化学腐蚀性能、摩擦磨损性能、结合强度以及抗热震性 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1278.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1278.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[郭瑞强]]></author>
      <pubDate>Wed, 14 Aug 2013 00:51:39 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[复合电镀Ni/CrAl高温涂层的制备]]></title>
      <description><![CDATA[ 摘要：目前，制备MCrAlY高温涂层通常采用电子束-物理气相沉积、等离子喷涂等方法。其中，电子束－物理气相沉积具有设备昂贵，沉积效率低、操作复杂等缺点；等离子喷涂制备的涂层气孔率高，易产生裂纹，与基材呈机械结合，服役过程中易剥落。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1252.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1252.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[刘德强]]></author>
      <pubDate>Fri, 02 Aug 2013 01:58:53 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[镁合金表面热喷涂法制备耐蚀耐磨涂层性能研究]]></title>
      <description><![CDATA[ 本文研究了在 AZ91D 镁合金表面采用火焰喷涂和火焰+等离子复合喷涂法制备CoCrAlY-Al2O3/TiO2陶瓷耐蚀耐磨涂层；采用电弧喷涂制备 Al、NiCrAl 金属耐蚀涂层的制备工艺及涂层性能。利用金相显微镜、扫描电镜（SEM）观察涂层形貌，利用线扫描和能谱测试分析了涂层的成分及结合方式，利用金相图像分析系统测量了涂层的孔隙率。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1246.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1246.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[王洪涛]]></author>
      <pubDate>Wed, 31 Jul 2013 01:24:25 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[激光熔覆颗粒增强复合涂层的力学性能及损伤破坏机理研究]]></title>
      <description><![CDATA[ 激光熔覆颗粒增强复合涂层材料，由于其高硬度、耐磨损、耐高温等优越和特殊的性能，在机械制造、石油化工、核工程、汽车工业、航空航天等恶劣和特殊环境下工作的机械零件和元件中得到了越来越广泛的应用。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1240.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1240.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[顾盛挺]]></author>
      <pubDate>Fri, 26 Jul 2013 13:25:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[半导体封装喷涂设备生产率提高的设计与实现]]></title>
      <description><![CDATA[ 12 寸晶圆凭借较低成本、较高的生产效率逐渐取代了传统的 8 寸晶圆，晶片大小的改变促使生产工艺流程也随着发生了一些变化。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1189.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1189.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[安建欣]]></author>
      <pubDate>Mon, 24 Jun 2013 00:58:13 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[铁基轧辊表面等离子喷涂涂层组织与性能的研究]]></title>
      <description><![CDATA[ 本文采用等离子喷涂法在铁基轧辊表面制备Cr3C2-NiCr涂层、NiAl涂层和NiAl/Cr3C2-NiCr复合涂层。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1123.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1123.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[岳佳锜]]></author>
      <pubDate>Wed, 15 May 2013 08:16:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热喷涂制备 Fe 基非晶合金涂层的组织性能及其激光重熔行为的研究]]></title>
      <description><![CDATA[ 本文根据多组元非晶合金系设计理论，在 Fe 基非晶合金粉末中以 W 替换 P，并采用大气等离子喷涂(APS)和超音速火焰喷涂(HVOF)工艺在 Q235 基体上制备了涂层，探索了在 Fe 基非晶合金涂层中以 W 替换 P 的可行性。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1120.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1120.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[崔 崇]]></author>
      <pubDate>Thu, 09 May 2013 01:21:40 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超音速电弧喷涂在防磨罩及模具上的应用]]></title>
      <description><![CDATA[ 阐述了超音速电弧热喷涂工艺技术的应用现状，介绍了将超音速电弧热喷涂应用于电站锅炉防磨罩及模具中的作用及优势。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1104.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1104.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[霸宝平， 刘玉娟]]></author>
      <pubDate>Tue, 23 Apr 2013 02:15:12 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热喷涂方法制备复合材料的工艺研究]]></title>
      <description><![CDATA[ 常规的热喷涂方法在大气中进行，被加热到高温的金属熔滴或粒子在大气中非常容易氧化，所以使用常规电弧喷涂方法得到的复合材料中存在相当数量的氧化物。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1089.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1089.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[赵玲彦]]></author>
      <pubDate>Wed, 10 Apr 2013 03:45:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超音速火焰喷涂粉末制备工艺研究]]></title>
      <description><![CDATA[ 超音速火焰喷涂作为一种制作高质量涂层的表面强化技术，越来越受到国内外各界的重视。而喷涂材料是整个喷涂技术的核心。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1077.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1077.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[周雄]]></author>
      <pubDate>Thu, 04 Apr 2013 15:18:19 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[镁合金表面冷喷涂快凝nz一A1合金粉末及涂层性能的研究]]></title>
      <description><![CDATA[  本文系统地研究了冷喷涂技术在镁合金表面的应用&amp;quot;利用超音速气体雾化装置制备了系列快凝Zn一AI合金粉末,研究了粉末特征;优化了镁合金表面冷喷涂快凝Zn一Al合金粉末工艺,分析了工艺参数对涂层质量的影响;观察了涂层微观组织,并分析了涂层与基体之间的结合;测定了涂层的硬度和涂层与基体的结合强度;并对涂层的防腐和耐磨性能 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1046.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1046.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[吕楠 ]]></author>
      <pubDate>Mon, 11 Mar 2013 06:20:53 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电热爆炸喷涂相涂层的制备及性能研究]]></title>
      <description><![CDATA[ 利用电热爆炸喷涂的方法，在铝合金和钢基体上分别制备了钥涂层。用扫描电子显微镜(SEM)、划痕仪、显微硬度计、表面粗糙度仪、微磨损试验机等表征了钥涂层性能。借助正交试验方法分析了铝涂层制备中各工艺参数对涂层质量的影响，确定了最佳工艺参数，并研究完成了一种制备大直径圆筒试样涂层的新方法。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1033.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1033.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[刘加健]]></author>
      <pubDate>Tue, 05 Mar 2013 02:21:59 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[ 冷喷涂锌镍合金工艺及性能研究]]></title>
      <description><![CDATA[ 40CrNi2Si2MoVA超高强度钢又称300M钢，是一种低合金超强度钢，具有强度高、横向塑性好、断裂韧性高、疲劳性能优良、抗应力腐蚀性能好等特点。目前国际上很多的军、民用飞机的起落架都是用300M钢制造，300M钢己成为世界上强度最高、综合性能最好、应用最广泛和声誉最好的飞机起落架用钢之一。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1017.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1017.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[吕保民]]></author>
      <pubDate>Tue, 26 Feb 2013 05:32:23 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[HVOF用高性能硬质合金喷涂粉末的制备技术及其基础理论研究]]></title>
      <description><![CDATA[ 为了使飞机起落架高强度钢活塞杆等在苛刻的工作环境下满足高的耐磨损要求，往往需对其易磨损部位表面进行耐磨涂覆处理，超音速火焰喷涂技术（HVOF)是获得高质量耐磨涂层的一种有效表面处理工艺之一，该技术通常采用硬质合金粉末为喷涂粉制备耐磨耐蚀涂层，而高性能的硬质合金粉末是获得高质量涂层的先决条件。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1004.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/1004.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[贡太敏]]></author>
      <pubDate>Thu, 21 Feb 2013 10:57:31 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[等离子喷涂制备钴基涂层及组织性能研究]]></title>
      <description><![CDATA[ 钴基自熔性合金粉末是一种优良的耐热、耐蚀、耐磨、抗高温氧化的材料，广泛应用于制备耐磨涂层。等离子喷涂技术由于操作工艺简单、喷涂效率高、涂层厚度可控等优点被广泛应用于制备涂层。为改善 12Cr1MoV 钢的表面性能、降低成本，本文采用等离子喷涂技术制备出钴基涂层以及不同 WC 含量的钴基复合涂层，并对涂层进行重熔处理，分析 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/919.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/919.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[陈鹏荣]]></author>
      <pubDate>Fri, 04 Jan 2013 01:44:12 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电弧超声改善堆焊和热喷涂质量的试验研究]]></title>
      <description><![CDATA[ 摘要:将电弧超声引入堆焊和热喷涂工艺,进行常规堆焊、等离子喷涂和引入电弧超声技术的对比试验,比较其堆焊层的金相组织、硬度、抗弯性能、冲击韧度和热障涂层的孔隙率、抗热震性能,结果表明:电弧超声的加入能够细化堆焊接头的熔合区组织,降低脆硬倾向,改善堆焊接头的抗弯性能和冲击韧性;由于超声波的空化效应、热效应和机械 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/891.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/891.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[何龙标　文雄伟　郝红伟　李路明　吴敏生]]></author>
      <pubDate>Sun, 23 Dec 2012 08:05:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[浅析装饰喷涂设备的渠道建设和渠道管理]]></title>
      <description><![CDATA[ 摘要:本文运用当代营梢理论，对瓦格纳公司的的梁道管理建设过程和梁道管理制度进行说明，并分析其制度的对公司业绩的影响。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/890.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/890.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[王宇]]></author>
      <pubDate>Sun, 23 Dec 2012 08:04:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[反应热喷涂法制备陶瓷刮刀]]></title>
      <description><![CDATA[ 摘要：介绍了反应热喷涂法陶瓷刮刀的制备过程，论述了它的耐磨擦、制造成本低等性能优势，指出它特别适合作涂布刮刀使用，可代替进口陶瓷涂布刮刀。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/866.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/866.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[班朝磊，杨建桥，赵红霞]]></author>
      <pubDate>Thu, 13 Dec 2012 02:18:06 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电弧喷涂与粉末涂料喷涂复合涂层防护技术]]></title>
      <description><![CDATA[ 摘 要：研究了热固性粉末涂料用作金属热喷涂涂层的封闭层及面层的防护技术，比较了分别喷涂环氧锌基重防腐粉末涂料、纯聚酯粉末涂料，喷涂环氧锌基重防腐粉末涂料后再喷涂纯聚酯粉末涂料以及热浸镀锌后喷涂纯聚酯粉末涂料等试样在不同盐雾和人工加速老化时间下的附着力。结果发现，只有熔融黏度偏低的环氧类粉末涂料适合用作封闭层 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/853.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/853.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[晁兵，陆东方]]></author>
      <pubDate>Wed, 12 Dec 2012 01:16:50 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[等离子喷涂技术现状及应用]]></title>
      <description><![CDATA[ 摘要: 等离子喷涂在热喷涂技术领域中占有相当重要的地位，特别是随着现代航空、航天技术的发展，高性能的陶瓷涂层是一种具有较大发展前景的新型高温材料，它既具有无机材料的耐高温、耐磨损、耐化学腐蚀等优良性能，又能保持与原有基材的结构强度，是目前解决高科技中材料热障、不耐磨、易腐蚀的最现实的技术方案之一，日益受到人们的广 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/841.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/841.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[王吉孝， 蒋士芹， 庞凤祥]]></author>
      <pubDate>Tue, 11 Dec 2012 00:17:02 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[纳米结构陶瓷涂层的制备技术]]></title>
      <description><![CDATA[ 摘　要:与传统的微米级陶瓷涂层相比,纳米结构陶瓷涂层的结合强度、断裂韧性、耐磨性等会显著提高,目前已在军民领域开始应用。纳米陶瓷涂层的制备存在一定的特殊性和较大难度,并且制备工艺会对涂层的组织和性能产生直接影响。本文对纳米结构陶瓷涂层的制备技术进行了详细介绍。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/829.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/829.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[武　创,郗雨林,王其红]]></author>
      <pubDate>Mon, 10 Dec 2012 03:26:15 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[机械球磨与烧结W基材料的组织与性能]]></title>
      <description><![CDATA[ 摘 要: 采用机械球磨与热压工艺制备了 W-TiC、W-Ni、W-CNTs( 碳纳米管) 和 W-Ni-CNTs 4 种 W 基材料。研究结果表明，机械球磨能显著降低复合粉的晶粒尺寸和增加晶格畸变。经机械球磨后热压的样品中 W-TiC的致密度最好，密度达到 18. 36g/cm3; W-Ni 和 W-CNTs 的密度分别为 17. 97g/cm3和 18. 23g/cm3，具有较好的致密性; W-Ni-CNT ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/812.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/812.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[郝旭暖 吴国强 代吉祥等]]></author>
      <pubDate>Fri, 07 Dec 2012 03:24:29 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[激光预处理对ＢａＦ２薄膜损伤性能的影响]]></title>
      <description><![CDATA[ 为了提高光学薄膜元件抗激光损伤的能力，除了寻找先进的镀膜方法及工艺外，还可采取后期处理，因为后期处理对激光损伤阈值（ＬＩＤＴ）也有重要影响。采用输出波长为１０６４ｎｍ的调Ｑ　Ｎｄ：ＹＡＧ激光器，对膜厚为λ／２（λ＝１０６４ｎｍ）的单层ＢａＦ２薄膜进行激光预处理，研究了其激光损伤特性。在光斑大小一定的条件下，改变能量密度和脉冲次数，分别研究了它们对薄膜阈值的影响，得出最佳处理参数：能量 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/799.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/799.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[邹逢，徐均琪，苏俊宏，马健波]]></author>
      <pubDate>Thu, 06 Dec 2012 04:46:38 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[自蔓延离心法制备 Fe3Al /W2C 复合涂层]]></title>
      <description><![CDATA[ 摘 要：以氧化铁、铝粉、三氧化钨、石墨为原料，采用自蔓延离心法制备了具有内生强化 W2C 相的 Fe3Al 涂层。采用x 射线衍射仪分析涂层相物相，采用扫描电镜观察涂层组织及磨损后形貌，利用盘销式试验机对比检测了 Fe3Al 和Fe3Al/W2C 涂层的干摩擦性能。结果表明，反应原料中的铝与石墨比例为 2:1 时，涂层中的主要物相为 W2C 和 Fe3Al。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/779.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/779.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[李会谦，高 峰，郭志猛]]></author>
      <pubDate>Wed, 05 Dec 2012 01:08:16 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[预涂和感应重熔制备 Ni60 熔覆层的研究]]></title>
      <description><![CDATA[ 摘 要：采用预涂和感应重熔方法在 45#钢上制备了 Ni60 熔覆层。对熔覆层的宏观照片、SEM、EDS、XRD 和硬度进行了分析。结果表明：A+B 粘接剂可以制备重熔效果良好的熔覆层。重熔后试样表面有大量灰黑色残渣，局部有些凸凹不平。重熔后界面附近的显微组织分为三部分：基体-过渡区-涂层熔覆区。涂层熔覆区为 Ni 基的，其上分布着块状组 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/768.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/768.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[张乐，陈美英，高峰，国俊丰，徐鹏]]></author>
      <pubDate>Tue, 04 Dec 2012 05:16:27 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[内孔等离子喷涂装置与工艺研究]]></title>
      <description><![CDATA[ 摘 要：针对内孔等离子喷涂时，环境温度高、烟尘污染严重等问题，为了实现对大功率柴油发动机 Φ150mm 气缸套内壁的喷涂，本文从结构和功能上研究设计了一种具有独特排尘、防尘、冷却功能的内孔等离子喷涂装置。采用SEM 对粉末和涂层进行表征，对涂层的孔隙率、显微硬度进行测试和分析，认为使用排尘、防尘、冷却机构后，涂层中杂质减少，孔 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/759.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/759.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[王海军，刘明，李绪强，郭永明]]></author>
      <pubDate>Mon, 03 Dec 2012 03:27:05 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[再制造工程中的热喷涂技术]]></title>
      <description><![CDATA[ 摘 要：再制造是废旧产品高科技维修的产业化，热喷涂技术是再制造的关键支撑技术之一。从基础及应用基础的角度研究了高速电弧喷涂金属间化合物耐高温冲蚀涂层、铝基氧化铝增摩涂层、Zn-Al-Mg-RE 耐海水腐蚀涂层及高效能超音速等离子喷涂 12Co-WC 耐砂粒磨损涂层、Al2O3/TiO2纳米结构耐磨涂层。结果表明，热喷涂技术制备的涂层可以 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/744.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/744.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[徐滨士，王海斗]]></author>
      <pubDate>Sat, 01 Dec 2012 03:26:47 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[等离子喷涂涂层的研究进展]]></title>
      <description><![CDATA[ 本文介绍了等离子喷涂涂层的微观结构，力学性能，涂层表面处理及物理性能等国内外最新的研究进展。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/735.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/735.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[唐家伟，谢淑兰，潘鑫]]></author>
      <pubDate>Thu, 29 Nov 2012 05:08:40 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[一种 CoNi 基雾化粉末制备及涂层性能]]></title>
      <description><![CDATA[ 本文主要研究了一种 CoNi 基合金粉末的制备工艺及喷涂后相关涂层的性能。 用 XRD、SEM、EDS 分别测定了合金、粉末、涂层的相组成和表面形貌。 结果表明合金组织为枝晶状，无明显的元素偏析；合金粉末呈类球形；涂层显微硬度 450HV0.3，涂层结合强度为 50MPa。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/723.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/723.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[崔颖，田玉亮，刘海飞，杨晓剑，马江虹]]></author>
      <pubDate>Wed, 28 Nov 2012 05:59:23 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[挡潮钢闸门金属热喷涂材料及工艺选择]]></title>
      <description><![CDATA[ 通过对沿海挡潮闸所处环境特点及金属热喷涂的机理分析,比较热喷涂锌、铝的优越性,对热喷涂工艺进行对比以及封闭涂层的选择,阐述和推荐挡潮闸钢闸门金属热喷涂防腐蚀方案。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/711.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/711.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[朱锡昶,朱雅仙,葛　燕,李　岩]]></author>
      <pubDate>Tue, 27 Nov 2012 04:19:15 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电弧喷涂技术应用现状及发展]]></title>
      <description><![CDATA[ 阐述了电弧喷涂技术的原理及特点。介绍了电弧喷涂技术在长效防腐蚀、机械零件修复与预防护、制模技术、工业锅炉受热管件耐高温腐蚀涂层的应用。论述了电弧喷涂技术的研究进展。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/695.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/695.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[李天虎，杨军，金珠]]></author>
      <pubDate>Mon, 26 Nov 2012 02:52:58 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电弧喷涂粉芯丝材的研究进展与应用]]></title>
      <description><![CDATA[ 简述了电弧喷涂粉芯丝材的优点及制作工艺,介绍了电弧喷涂粉芯丝材的发展历程,以及耐磨损、耐腐蚀、耐高温电弧喷涂粉芯丝材的最新研究进展,展望了电弧喷涂粉芯丝材的应用前景,指出了金属陶瓷复合粉芯丝材、非晶态粉芯丝材、纳米粉芯丝材是未来电弧喷涂粉芯丝材的发展方向。 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/688.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/688.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[黄林兵,余圣甫,邓　宇,戴明辉,徐慧子]]></author>
      <pubDate>Sat, 24 Nov 2012 06:37:07 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热喷涂技术在产品再制造领域的应用及发展趋势]]></title>
      <description><![CDATA[ 再制造产业已列为国家发展战略性新兴产业，热喷涂技术具有喷涂材料广泛、基体形状与尺寸不受限制、涂层厚度容易控制、工艺操作简单、成本低效率高、能赋予零件表面特殊性能等特点，是实现损伤零部件表面尺寸恢复和性能提升的关键技术手段，已成功应用于国防工业、印刷、航空航天、石油化工、矿山机械、电力等领域装备零部件的再制 ]]></description>
      <link>http://www.sunspraying.com/lunwenxuandeng/pentushebei/684.html</link>
      <guid>http://www.sunspraying.com/lunwenxuandeng/pentushebei/684.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[张伟，郭永明，陈永雄]]></author>
      <pubDate>Fri, 23 Nov 2012 07:16:19 +0000</pubDate>
    </item>
  </channel>
</rss>