<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>喷涂设备</title>
    <link>http://www.sunspraying.com/jishuwenxian/pentushebei/</link>
    <description>Latest 50 infos of 喷涂设备</description>
    <copyright>Copyright(C) Empire CMS</copyright>
    <generator>Empire CMS by Empire Studio.</generator>
    <lastBuildDate>Sat, 11 Apr 2026 23:57:52 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.sunspraying.com/e/data/images/rss.gif</url>
      <title>桑尧热喷涂网</title>
      <link>http://www.sunspraying.com/</link>
    </image>
    <item>
      <title><![CDATA[等离子射流特性]]></title>
      <description><![CDATA[ 通电后，在阴阳两电极之间产生等离子电弧，喷涂时的等离子射流产生于等离子电弧的形式如图 1 所示，A 处表示是水冷却系统，B 处为离子气，C 为处为电源装置。离子气的成分主要是氩气、氮气、氦气。电弧产生初期由氩气牵引电弧， ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20220509/2570.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20220509/2570.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 09 May 2022 00:53:29 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[多孔氧化铝陶瓷的制备技术]]></title>
      <description><![CDATA[ 1.有机泡沫浸渍法有机泡沫浸渍法是利用具有一定三维网络结构的多孔聚合材料作为载体，通过在预先磨制、混合均匀的陶瓷浆料中反复浸渍，获得吸浆饱和，浆料中颗粒均匀附着在网状结构上的多孔有机载体，再将有机载体通过高温烧 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20220508/2566.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20220508/2566.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Sun, 08 May 2022 11:56:54 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[EB–PVD技术]]></title>
      <description><![CDATA[ EB&amp;amp;ndash;PVD 利用高能电子束通过 磁场或电场聚焦在涂层的靶材上，加 热材料，并使之快速熔化和蒸发，然 后在低气压环境中，靶材的气相原子 通常以直线从熔池运动到基底表面 并形成柱状晶，所得到的沉积涂层与 基底的结合力非 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20220308/2542.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20220308/2542.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 08 Mar 2022 01:12:10 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[ Laserline 6000W光纤耦合输出半导体激光器]]></title>
      <description><![CDATA[ 重熔时喷嘴可同步向熔池送入环形保护气流，采用纯Ar作为保护气体。Co基涂层制备采用同步送粉法直接在打底层表面进行激光熔覆，熔覆装备同样采用Laserline6000W光纤耦合输出半导体激光器，最终将获得具有三层梯度结构的激光 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20210301/2348.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20210301/2348.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 01 Mar 2021 12:07:31 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[空蚀试验装置]]></title>
      <description><![CDATA[ 目前空蚀试验装置主要有转盘式装置、文丘里管装置及超声波振动装置。转盘式空蚀试验装置是利用水箱中的转盘产生离心力，试样对称安装在转盘上边缘，如图1所示，试样边缘预加工的小孔便是空蚀源，这时转盘的高速旋转就可能扰 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20201116/2299.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20201116/2299.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 16 Nov 2020 06:02:53 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[管内壁约束电爆喷涂设备样机]]></title>
      <description><![CDATA[      约束电爆喷涂装置在喷涂实验过程中表现出的优异性能和高度的可靠性，在保留了装置关键技术的同时，考虑到管内壁涂层制备的特殊性，对装置的喷***、约束腔以及传送系统的尺寸及装配结构进行了优化改进，在此基础上增加了 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20201109/2298.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20201109/2298.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 09 Nov 2020 10:25:52 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[航空发动机涡轮叶片热障涂层静态试验模拟装置]]></title>
      <description><![CDATA[  图1为该试验模拟装置及其效果，该装置可以模拟高性能航空发动机 内温度的交变循环、硬质颗粒的冲击、腐蚀颗粒的侵蚀、冷却气体等单一或任意两种或多种服役环境，并实现实时测试热障涂层温度场、三维位移场、裂纹萌生与 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20201106/2296.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20201106/2296.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 06 Nov 2020 13:52:47 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[利用冷喷涂技术制备导电及导热涂层，表面修复]]></title>
      <description><![CDATA[  冷喷涂金属涂层氧含量低、致密度高、结合强度高，已成为导电和导热领域的最佳喷涂工艺。江胜波等人采用冷喷涂技术在铝合金基体表面沉积铜涂层（见图），结果发现，铜涂层氧化率极低，致密度、结合强度、电阻率均优于电弧喷涂。 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200528/2203.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200528/2203.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 28 May 2020 06:44:41 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[利用冷喷涂技术制备耐高温耐磨涂层]]></title>
      <description><![CDATA[  常见的耐高温涂层材料有Ni基、Co基合金，MCrAlY合金，氧化物陶瓷等，目前主要采用热喷涂工艺制备，不可避免地存在涂层氧化、涂层孔隙率高、结合强度低等问题。冷喷涂是在低温下通过大塑性变形实现沉积，涂层氧含量低，致密度高， ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200528/2202.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200528/2202.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 28 May 2020 06:43:37 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[利用冷喷涂技术制备防腐涂层]]></title>
      <description><![CDATA[  腐蚀是金属材料应用中亟待解决的问题之一，最典型的案例是海洋环境中的舰船、海洋平台以及港工设施等。它不仅会造成极大的资源浪费，而且还威胁着设备和人身安全。随着冷喷涂技术的发展和应用，铝、锌、镍及其合金等金属 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200528/2201.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200528/2201.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 28 May 2020 06:42:03 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[装备维修与再制造工程]]></title>
      <description><![CDATA[  维修在装备全寿命周期中具有重要作用，通过维修恢复装备的使用性能、延长装备服役寿命，可产生显著的军事、经济效益。随着装备更新换代速度越来越快，大量淘汰的老旧装备造成了极大的资源浪费和环境污染，以节约资源能源和 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200424/2171.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200424/2171.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 24 Apr 2020 06:28:14 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[材料表层强化技术]]></title>
      <description><![CDATA[  新一代航天、航空、汽车、机械装备的发展，对材料与构件的组织、变形以及表面完整性提出了更高的要求，尤其是传动、转动等运动构件，例如活塞、阀门等采用钛合金制件以降低结构重量，减小摩擦系数，提高耐磨性和抗微动磨损能 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200424/2170.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200424/2170.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 24 Apr 2020 06:27:10 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高承载件表面强化技术]]></title>
      <description><![CDATA[  硬质耐磨强化涂层技术可以有效弥补不同应用环境中基体材料的性能不足，使其适应严苛的工作环境。从涂层体系来说，高承载件表面强化涂层体系主要包括碳氮化物、硼化物、氧化物等传统硬质涂层，以及金刚石、类金刚石、立方 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200424/2169.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200424/2169.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 24 Apr 2020 06:26:31 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[石墨自润滑铁基合金堆焊]]></title>
      <description><![CDATA[  随着工程技术的高速发展，许多工况条件处于无油润滑或少油润滑状态下，使用传统的润滑剂的方式会造成工件之间干摩擦，磨损速率极快的问题。此时采用具有减摩特性的材料，比如固体自润滑材料能有效的解决以上问题。常见的自 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200402/2146.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200402/2146.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 02 Apr 2020 09:14:14 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高温固体自润滑涂层的制备工艺]]></title>
      <description><![CDATA[  目前，高温固体自润滑涂层的制备工艺主要包括: 热喷涂技术、激光熔覆技术、电火花沉积技术等。热喷涂技术：自Schoop博士发明喷涂装置以来，热喷涂技术的内涵更加丰富，应用范围更广，其中爆炸喷涂、超音速火焰喷涂、等离子喷 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200323/2133.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200323/2133.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 23 Mar 2020 06:05:35 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[先进冷喷涂技术]]></title>
      <description><![CDATA[  冷喷涂技术起源于20世纪80年代中后期，前苏联科学家在进行风洞实验时发现，当示踪粒子的速度超过某一临界速度时，示踪粒子对靶材表面的作用由冲蚀变为沉积，由此提出了冷喷涂概念。随后，研究人员采用该技术在不同基材表面成 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200303/2122.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200303/2122.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 03 Mar 2020 05:51:06 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[液相等离子喷涂技术]]></title>
      <description><![CDATA[  液相喷涂主要包括悬浮液等离子喷涂（SPS）和溶液前驱体等离子喷涂（SPPS）。SPS是通过亚微米或纳米粒子沉积且具有特殊性质的涂层材料。固体颗粒被稳定地分散到溶剂中，形成悬浮液，通过液体进料系统输送到等离子火焰中。一些文 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200227/2117.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200227/2117.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 27 Feb 2020 07:22:37 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[热处理铁基激光熔覆层]]></title>
      <description><![CDATA[  激光熔覆是２０世纪７０年代兴起的一种激光表面改性技术，即在激光束作用下将合金粉末或陶瓷粉末与基体表面迅速加热并熔化，在光束移开后冷却形成与基体材料呈良好冶金结合的表面熔覆层，具有热影响区小和基体变形小等优点。激光 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20200226/2110.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20200226/2110.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 26 Feb 2020 07:54:50 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[TiB2/Al2O3复合粉体的喷雾干燥造粒与特性研究]]></title>
      <description><![CDATA[ 二硼化钛(TiB2 )具有高熔点(2790℃ )、低密度(4.52g．cm )、高硬度(HV=34GPa)、较高的强度和断裂韧性、极好的化学稳定性以及优良的导电、导热等性能，从而使其在高温结构材料、耐磨、耐蚀材料以及电气材料等领域有着广阔 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20191016/2001.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20191016/2001.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 16 Oct 2019 11:17:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[喷雾造粒制备氧化铝]]></title>
      <description><![CDATA[  喷雾造粒制备氧化铝（Ａｌ２Ｏ３）粉体，系统主要由制浆系统、制备系统、热风输送系统、泥浆输送系统、喷雾雾化系统、除尘系统、风力系统、粉料输送系统、控制系统等组成。热风炉燃烧生成的高温热风，经热风管道后进入造粒塔顶部，经过 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190927/2000.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190927/2000.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Fri, 27 Sep 2019 01:36:34 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[微弧氧化]]></title>
      <description><![CDATA[  随着产品向长寿命、高可靠、轻量化、大功率、多功能的方向发展，对星载产品的热控薄膜提出了多功能、高精度、热控参数可设计等要求。利用表面涂层来控制星体温度的方法是最基本、有效可靠的方法。因此，对于各种新型热 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190916/1998.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190916/1998.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 16 Sep 2019 06:00:14 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[电弧喷涂制模]]></title>
      <description><![CDATA[  电弧喷涂制模的思想起源于 60年代提出的终成形热喷涂成形 ( net- shape thermal spray fo rming ) ,基本过程是将熔化的金属雾化 ,高速喷射沉积于基体上 ,所获制件的形状与基体相对应 ,是一种集材料制备与成形于一体 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190713/1968.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190713/1968.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Sat, 13 Jul 2019 03:09:32 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[等离子喷涂沉积原理]]></title>
      <description><![CDATA[  等离子喷涂不仅是目前最常用的制备热障涂层的热喷涂技术, 同时也是最早用于制造热障涂层的先进工艺。它是用等离子体发生器(等离子喷***)产生等离子体 , 同时送粉器管中输送的粉末在等离子体焰流中被加热至熔化状态,  ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190701/1959.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190701/1959.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 01 Jul 2019 13:51:33 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[悬浮式送粉等离子喷涂]]></title>
      <description><![CDATA[  悬浮式送粉等离子喷涂是一种采用液料送粉方式, 可直接喷涂纳米粉末且可以形成超薄纳米涂层的新型喷涂技术。传统的非团聚喷涂粉末粒子半径必须大于 10 &amp;amp;mu;m,涂层厚度一般大于 125 &amp;amp;mu;m。悬浮等离子喷涂采用液料为 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190626/1957.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190626/1957.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 26 Jun 2019 10:05:04 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高温自润滑涂层喷涂工艺]]></title>
      <description><![CDATA[  对材料摩擦学性能的研究发现，涂层硬度、致密性和应力分布状态等，对涂层服役时的摩擦学性能、力学性能和高温稳定性能都有至关重要的影响。由于 APS 喷涂的特点在于等离子焰流中心的高温使粉末在经过焰流时，由于粉末较低 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190619/1951.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190619/1951.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 19 Jun 2019 07:45:33 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高频感应熔覆技术制备 TiB2增强 Ni 基涂层]]></title>
      <description><![CDATA[  作为油田抽油杆的基体材料，由于特殊的服役环境， 35CrMo 合金结构钢常常受到不对称循环载荷的作用以及产出液中 CO2 和 H2S 等腐蚀介质的腐蚀，易发生疲劳断裂和腐蚀疲劳断裂。如今，中国大规模陆地油田的开采作业已经进入 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190617/1948.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190617/1948.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 17 Jun 2019 07:53:34 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[纳米造粒料等离子喷涂氧化锆涂层的热物性研究]]></title>
      <description><![CDATA[  氧化锆涂层具有低导热系数、高的热膨胀系数(1.1&amp;amp;times;10-5/K), 应用于现役航空燃气发动机的涡轮叶片上, 但随着航空燃气发动机向高流量比、高推重比、高进气口温度方向发展, 新一代航空发动机进气口温度将大大超过 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20190507/1919.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20190507/1919.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 07 May 2019 09:57:04 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高性能热喷涂粉末制备技术研究进展]]></title>
      <description><![CDATA[        热喷涂粉末与其它P/M用粉末不同,它要求粉末粒度细小(15~150拼m),分布范围窄,球形度高,流动性好,气体及杂质含量低阔,随着热喷涂技术的发展,已发展了工程化粉末,如空心球粉末、复合粉末等,用于特殊用途的涂层. ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20180802/1812.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20180802/1812.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Thu, 02 Aug 2018 12:23:41 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超音速等离子喷涂发展前景]]></title>
      <description><![CDATA[           超音速等离子喷涂技术可所制备的涂层材料广泛，尤其可以制备优质陶瓷涂层和复合涂层，涂层组织结构致密，涂层性能优良。基于其优良的涂层制备性能，国内外研究者对超音速等子喷涂制备涂层技术正在进行全方位的研究 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20180521/1779.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20180521/1779.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[]]></author>
      <pubDate>Mon, 21 May 2018 13:50:14 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[激光熔覆技术]]></title>
      <description><![CDATA[       激光熔覆是指以不同的添料方式在被熔覆基体表面上放置被选择的涂层材料经激光辐照使之和基体表面一薄层同时熔化，并快速凝固后形成稀释度极低，与基体成冶金结合的表面涂层，显著改善基层表面的耐磨、耐蚀、耐热、抗 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171220/1711.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171220/1711.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[天天]]></author>
      <pubDate>Wed, 20 Dec 2017 12:22:25 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[超低压等离子喷涂技术分类]]></title>
      <description><![CDATA[     超低压等离子喷涂技术按工作压力以及喂料方式不同，大致可分为三类，如表 1 所示。                        分类            工作压力/Pa            喂料方式            沉积状态            涂层结构             ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171109/1684.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171109/1684.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Thu, 09 Nov 2017 14:30:12 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[爆炸喷涂]]></title>
      <description><![CDATA[        爆炸喷涂已经有50多年历史的爆炸喷涂技术近年来有了新的发展。美国Praxair公司的D-gun和SDG，以及来源于前苏联的爆炸喷涂技术，在航空等领域得到了一些应用。爆炸喷涂工艺过程中，粉末粒子被加速到非常高的速度(有 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171107/1682.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171107/1682.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Tue, 07 Nov 2017 15:30:33 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[内孔HVOF喷***]]></title>
      <description><![CDATA[    近10年来，用高速火焰喷涂涂层替代电镀硬铬得到了广泛的研究和应用，特别是高速火焰喷涂碳化钨涂层作为替代涂层应用非常成功。但是，用高速火焰喷涂制备内孔涂层，特别是直径500mm以下的内孔，一直局限于长径比&amp;amp;le;1的工况， ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171107/1681.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171107/1681.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Mon, 06 Nov 2017 16:04:23 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[V-Gun]]></title>
      <description><![CDATA[    将喷涂的铝涂层的孔隙率从1.0%降低到约0.1%，氧化V-Gun HVOF喷涂过程中氧气和燃料在燃烧室内燃烧，火焰温度在3000℃左右，因此常见HVOF喷枪如JP5000、K2和JetKote等都需要采用冷却水进行冷却，大约1/4的热量被冷却水带走 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171103/1680.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171103/1680.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Fri, 03 Nov 2017 14:13:40 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[HVAF喷涂]]></title>
      <description><![CDATA[          HVAF技术采用空气代替氧气作为燃烧介质，降低了成本，同时降低了焰流温度（约1300℃）。在喷涂过程中，由于粉末颗粒温度一般低于熔点，因此不容易产生喷嘴积瘤；粉末颗粒速度高，可到700~850m/s；喷涂涂层的氧化和涂层材料分 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171102/1679.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171102/1679.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Thu, 02 Nov 2017 14:23:49 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[LPPS-TF技术]]></title>
      <description><![CDATA[    除了在等离子喷涂设备上进行改进外，人们还研制了一些新型的热喷涂技术来满足新型涂层需求。   一般情况下，低压等离子喷涂设备(LPPS：LowPressurePlasmaSpray)工作在5000~25000Pa的压力下。近年出现了一种新型的LPPS-T ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171101/1678.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171101/1678.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Wed, 01 Nov 2017 14:23:23 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[单电极等离子喷***]]></title>
      <description><![CDATA[    多电极等离子喷枪经常需要同时更换多个阴极或阳极，因此，许多公司进行了单电极（一个阴极加一个阳极)  结构等离子喷枪的改进工作。ProgressiveTechnology公司推出的100HE等离子喷涂系统所用等离子喷***是一种新型的单阴 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171031/1677.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171031/1677.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Tue, 31 Oct 2017 13:39:37 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[搅拌摩擦焊技术简介]]></title>
      <description><![CDATA[     搅拌摩擦焊（Friction Stir Welding，简称FSW）是英国焊接研究所（TWI）于1991年发明的材料固相焊接技术，相比于传统的熔焊技术，搅拌摩擦焊有着诸多优点，特别是它能完成很多其他焊接技术所不能实现的焊接操作，被称为20世纪90年 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171023/1671.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171023/1671.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Mon, 23 Oct 2017 14:11:24 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[磁控溅射工艺]]></title>
      <description><![CDATA[     石墨类薄膜的制备工艺过程一般如下：镀前预处理一一装样一一抽真空一一氢离子轰击一一调解气体一一溅射&amp;amp;mdash;出炉。    镀前预处理：将样品表面清理干净。    装样：将样品用夹具固定，挂在旋转框架的真空室内，使衬底表 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171014/1665.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171014/1665.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Sat, 14 Oct 2017 02:03:09 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[激光熔覆技术的工艺参数和工艺流程]]></title>
      <description><![CDATA[     激光熔覆的工艺参数包括:激光功率、扫描速度、离焦量、光斑尺寸、送粉速率以及保护气体流量等，对于多道熔覆，还应包括搭接率。工艺参数的选取应在保证涂层与基材能形成冶金结合情况下，尽量降低基体材料对熔覆层的稀 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171012/1663.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171012/1663.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Thu, 12 Oct 2017 14:43:38 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[激光熔覆技术的特点]]></title>
      <description><![CDATA[     随着工业技术的发展，人们已经意识到把价格昂贵且高性能的合金包覆于廉价而低档次材料工件上不但可以延长工件的服役时间，节约成本，而且涂层的性能是可控的，激光熔覆技术在上世纪70年代应运而生。激光熔覆是一种先进的 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171010/1661.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171010/1661.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Tue, 10 Oct 2017 14:26:18 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[磁控溅射高温固体自润滑涂层的研究与进展]]></title>
      <description><![CDATA[     高温固体自润滑涂层因在高温下具有优良的力学和摩擦学性能而成为表面工程摩擦学的关键技术之一｡随着技术的发展，高温固体自润滑材料开始应用于航空领域，如发动机部件和配合部件等｡其中，在航空紧固件上涂敷高温固体润滑 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171009/1660.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171009/1660.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Mon, 09 Oct 2017 14:35:41 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[磁控溅射的特点]]></title>
      <description><![CDATA[ 磁控溅射的特点 （1）离子轰击电流较大，使靶表面的溅射刻蚀速率大大增加，膜层的沉积速率提高，沉积效果好、产量大；（2）气体原子和低能电子碰撞电离的概率很高，大大提高气动力效率高的溅射率；（3）而入射离子能量过高会使目标产生大量的 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171007/1659.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171007/1659.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Sat, 07 Oct 2017 14:05:35 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[磁控溅射设备]]></title>
      <description><![CDATA[     直流非平衡磁控溅射设备主要由溅射镀膜系统，真空系统，气体及控制系统这三大系统组成。    （1）溅射镀膜系统    溅射系统由一个直流电源，基板加热装置，冷却水，挡板，永磁屏蔽层等，以上磁控溅射系统的核心部分。冷却水用来冷 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20171003/1658.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20171003/1658.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Tue, 03 Oct 2017 14:56:39 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[TCO磁控溅射专业词汇（中英对照）]]></title>
      <description><![CDATA[     TCO（Transparent conductive oxide）玻璃，即透明导电氧化物镀膜玻璃 ，是在平板玻璃表面通过物理或者化学镀膜的方法均匀镀上一层透明的导电氧化物薄膜。AZO  ZnO：Al （Al-doped ZnO，Aluminum-doped zinc oxide）氧化铟锡  IT ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20170916/1637.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20170916/1637.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[tianzhongma]]></author>
      <pubDate>Sat, 16 Sep 2017 11:32:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[基于机载电子设备的喷涂机器人生产线方案]]></title>
      <description><![CDATA[ 针对机载电子设备结构形式复杂、零件尺寸不大、批量较小、种类较多及漆种较多的特点，设计了一种高柔性多品种小批量的全自动机器人喷涂生产线。该生产线采用基于Profibus工业总线的控制技术，实现整个喷涂生产线系统的通信和组网。采用射频识别技术进行零件喷涂工艺信息的识别。采用基UG模型的全数字化喷涂程序设计及喷涂仿真技 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20170730/1544.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20170730/1544.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[仝晓刚]]></author>
      <pubDate>Sun, 30 Jul 2017 10:32:57 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[微波烧结制备 ITO 靶材的工艺]]></title>
      <description><![CDATA[ 摘 要：采用单相 ITO(indium tin oxide，铟锡氧化物)复合粉末，经过压制成形后，在纯氧气氛下微波烧结制备 ITO靶材，研究烧结温度、保温时间和压制压力等主要工艺参数对 ITO 靶材致密化的影响。 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20140403/1493.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20140403/1493.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[袁 振，易健宏，孙本双，钟景明]]></author>
      <pubDate>Thu, 03 Apr 2014 09:59:09 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[氧化锌铝(ZAO)陶瓷靶材制备及其薄膜性能]]></title>
      <description><![CDATA[ 摘要　溶胶-凝胶方法制备的ZnO和Al2O3混合粉末经冷压预成型加真空低压烧结,制备了高致密度(相对密度99%)、低成本的ZAO陶瓷靶材。 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20140317/1488.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20140317/1488.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[杨伟方，梁展鸿，侯亚奇，庄大明，张　弓]]></author>
      <pubDate>Mon, 17 Mar 2014 01:22:16 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[溅射靶材的制备与应用]]></title>
      <description><![CDATA[ 摘　要：在信息产业不少基础产品的制造过程中，需使用多种溅射靶材，本文简介溅射靶材的制造及主要应用情况。 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20140313/1485.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20140313/1485.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[杨邦朝，崔红玲]]></author>
      <pubDate>Thu, 13 Mar 2014 07:21:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高效能超音速等离子喷涂系统及其应用]]></title>
      <description><![CDATA[ 【摘要】超音速等离子喷涂技术是当今热喷涂技术领域的重点发展方向之一。由于具有焰流温度高、射流速度快等特点，超音速等离子喷涂技术几乎可以喷涂任何粉末材料，且能够制备出高质量的涂层，特别是高质量的陶瓷涂层。 ]]></description>
      <link>http://www.sunspraying.com/jishuwenxian/pentushebei/20140311/1478.html</link>
      <guid>http://www.sunspraying.com/jishuwenxian/pentushebei/20140311/1478.html</guid>
      <category>喷涂设备</category>
      <author><![CDATA[王海军 朱 胜 郭永明]]></author>
      <pubDate>Tue, 11 Mar 2014 02:18:45 +0000</pubDate>
    </item>
  </channel>
</rss>